HP hn200e Owner's Manual page 55

To enable remote management:
1 Click the Advanced tab.
2 Click the Filters tab and select Enable under Remote Management.
3 Click Apply. A remote managment password will be assigned.
To change remote management password:
1 On the Password screen, in the Remote Management Password box, enter a
new password.
2 Click Apply.
Restore Factory Defaults: Allows you to restore the Gateway default settings.
Note: If you set the Restore Factory Default option to Yes and click Apply, you will
clear all of the Gateway's settings. You will have to set up the Gateway again.
password
55