Shark STEAM POCKET SE400 Owner's Manual page 8

Getting Started - cont'd
fig. 2
fig. 3
2 Use the lavender loop on the side of
the micro-fiber cleaning pad to slide
the mop head into the pad pocket.
Then secure the quick fasteners on
the top of the pocket to lock in place.
(fig. 2)
3 Snap the mop head into the base to
secure it. (fig. 3)
4
Open the flap on the back of the
steam mop. (fig. 4)
Use the filling flask and pour water
into the tank. Do not overfill. Close
the flap on the water tank. (fig. 5)
4 TOLL FREE: 1-800-798-7398
SE400_11_IB_E_111003_1.indd 4
fig. 4
fig. 5
IMPORTANT: Do not use on unsealed
wood or unglazed ceramic floors.
On surfaces that have been treated
with wax or some no wax floors,
the sheen may be removed by
the heat and steam action. It is
always recommended to test an
isolated area of the surface to be
cleaned before proceeding. We
recommend that you check the use
and care instructions from the floor
manufacturer.
NOTE: To prolong the life of your
Steam Mop, we recommend using
distilled water.
11-10-04 11:35 AM