IMPORTANT SAFETY INSTRUCTIONS For Household Use Only WARNING: WHEN USING YOUR SHARK ® STEAM MOP, BASIC SAFETY TO REDUCE THE RISK OF FIRE, PRECAUTIONS SHOULD ELECTRIC SHOCK OR INJURY: ALWAYS BE FOLLOWED, Use the system only for its INCLUDING THE FOLLOWING: intended use.
Page 3
English 11. DO NOT unplug by pulling on 22. Never use the Steam Mop without power cord. To unplug, grasp the micro-fiber cleaning pad attached. plug not the power cord. Do not 23. Keep your work area well lit. use extension cords or outlets 24.
Page 4
This manual covers model numbers: SE400 11 TECHNICAL SPECIFICATIONS Voltage: 120V., 60Hz. Power: 1500 Watts Water Capacity: 300ml (10 oz.) TOLL FREE: 1-800-798-7398 SE400_11_IB_E_111003_1.indd 4 11-10-04 11:35 AM...
English Contents Thank you for Getting Started ..............2 purchasing Using Your Steam Mop ............5 the Shark ® Care of Your Steam Mop ............9 Professional Lite Troubleshooting Guide ............11 Steam Pocket Warranty ...................15 ® Mop. www.sharkclean.com SE400_11_IB_E_111003_1.indd 1 11-10-04 11:35 AM...
When assembling your steam mop there may be a little water in or around the water tank. This is because we test all our steam mops 100% before you buy them, so you get a quality Shark Steam ® Pocket Mop.
Page 7
Phillips or a flat the wall. To prolong the life of your head screwdriver (screwdriver not Shark Pro Lite Steam Pocket ® ® included). (fig. 1) Mop, we recommend using distilled water.
Page 8
Getting Started - cont’d fig. 2 fig. 4 fig. 3 fig. 5 Use the lavender loop on the side of IMPORTANT: Do not use on unsealed the micro-fiber cleaning pad to slide wood or unglazed ceramic floors. the mop head into the pad pocket. On surfaces that have been treated Then secure the quick fasteners on with wax or some no wax floors,...
If the light does not turn on, Visit www.sharkclean.com for other reference the troubleshooting section great quick cleaning products to on page 12. (fig. 7) complement your Steam Mop, such as the Shark Navigator™ Lift Away ® ® (model NV350). www.sharkclean.com SE400_11_IB_E_111003_1.indd 5...
Page 10
Using Your Steam Mop - cont’d fig. 9 fig. 8 fig. 10 SELECTING YOUR STEAM SETTING Press the Top button once for Clean your floors with a forward and DUST setting (DUST lighted setting backward motion. (fig. 10) indicator will illuminate). DUST setting To stop steaming, press either STEAM is a light steam for a quick dusting CONTROL Button two times.
Page 11
English The Shark Pro Lite Steam Pocket Mop has two unique steam settings ® ® so you can use the perfect amount of steam for the cleaning task at hand. See below for tips on when to use each setting.
Page 12
Using Your Steam Mop - cont’d fig. 11 NOTE: Please wait 2-3 minutes for When one side of the micro-fiber the Steam Mop to cool off before cleaning pad gets dirty, just flip removing the mop head or the the mop to use the other side and micro-fiber cleaning pad.
Replace Control buttons two times to return the water cap. (fig. 13) the mop to Standby mode. The LED To store the Shark Pro Lite Steam ® lights will return to flashing BLUE. Pocket Mop hanging up, first ®...
To prolong the life of your mop, we up lint. Only use liquid detergent strongly recommend that you use (no powder detergent). Do not use Shark ’s Water Filtration Bottle to ® any fabric softeners or bleach. Line prevent calcification build-up from dry or dry on a low dryer setting.
English Troubleshooting Guide PROBLEM POSSIBLE REASONS & SOLUTIONS Your Steam Mop should be securely plugged into a 120V AC electrical outlet only. The Pro Lite Steam Pocket ® Mop will Check your fuse or breaker. not turn-on. If your unit still does not work, please contact Customer Care at 1-800-798-7398.
Product Registration Please visit www.sharkclean.com or call 1-800-798-7398 to register your new Shark ® product within ten (10) days of purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address.