Shark Steam Pocket S3505W Owner's Manual page 5

5
QUICK TIP:
For easier
pushing
and pulling,
extend the
handle length.
6
PREPARE
5 For your comfort, you can adjust
the height of the mop. Just lift the
latch on the tube 90 degrees to the
open position. Holding the handle,
extend the tube to the height that
is right for you and then close latch
to locked position.
6 Plug in mop and wait 30 seconds
or less for the mop to heat up.
Pump the handle of the mop by
pushing downward about 10 to 12
times to create steam.
NOTE: Steam is created
automatically when you start
mopping.
DIRT CAN'T HIDE ON
EITHER SIDE! When one
side of the pocket gets
dirty, just turn the mop
head over and clean with
the other side of the
Steam Pocket
QUICK TIPS: Your Steam
Pocket Mop comes with 3
®
unique mop heads. Use the
All-Purpose mop head for
any room in your house, the
triangular Versa-Tile ™ mop
head for bathrooms and
tight spaces and the Large
Area mop head for wide
area cleaning.
NOTE: Do not leave your
Steam Pocket
Mop
®
unattended during use.
IMPORTANT: Never leave
the Steam Pocket
one spot for any period of
time with a damp or wet
micro-fiber Steam Pocket
attached as this will damage
your floors.
www.sharkclean.com
.
®
® Mop in
®