Settings
The Initial Settings Procedure
The Home screen will not appear if you
●
do not configure the initial settings.
The OSD (On Screen Display) may
●
change in this player after you
upgrade the software version.
The access steps may differ depending
●
on the menu you selected.
After the initial settings process is
●
complete, you can then operate the
panel buttons and remote control.
After you have connected the player to your
TV, turn on the TV and player. When you turn
on the player the first time, the player's Initial
Settings screen appears on the TV. The Initial
Setting procedure lets you set the On Screen
Display (OSD) and menu languages, the
aspect ratio (screen size), the network type,
and connect the player to your network.
To run the Initial Settings procedure, follow
these steps:
1. Plug in the Blu-ray player, turn on your
TV, and then turn on the Blu-ray player by
pressing the pOWER button on the remote.
The Initial Settings Language screen appears.
Initial Settings I On-Screen Language
Select a language for the on-screen displays.
Български
Hrvatski
Cestina
dansk
Netherlands
English
> Move
" Select
2. Select the desired language, and then press
the v button. The Start screen appears.
10
Initial Settings
TV Aspect and Network will be set.
Each setting may be changed later under "Settings"
Start
a
previous
" Select
3. Press the v button. The TV Aspect
screen appears.
4. On the TV Aspect screen, select the
desired TV Aspect Ratio, and then press
the v button. The Network screen
appears.
✎
NOTES
An explanation of each Aspect Ratio
■
appears on the screen. Highlight each
choice to see each explanation. If you
have an HDTV, we suggest you choose
16:9 original.
5. If you have connected a LAN cable
to the Blu-ray player, Initial Setup
defaults to Wired Network. Go to
Wired Network on the right side of the
page. If you have not connected a LAN
cable, Initial Setup defaults to Wireless
Network. Go to Wireless Network on
the right side of the page.
✎
NOTES
If you have no network, select Skip by
■
pressing the BLUE (d) button, and then
go to Step 6.
6. The Initial Settings Complete window
appears and remains on the screen
for a few moments. Then, the Home
screen appears.
Wired Network
1. The Blu-ray player automatically verifies
your wired network.
Initial Settings I Network
Select your network type.
Network type
Wired
Connect
Network cable connected.
a previous d Skip m Move " Select
2. After the player verifies the network,
press the v button.
3. Go to Step 6 on the left side of the
page.
Wireless Network
1. The Blu-ray player automatically
searches for and then lists all wireless
networks that are within range.
Initial Settings I Network
Select your network type.
Network type
Wireless
Wireless network
you can connect your Blu-ray
Add Network
player to the internet. please
select which wireless network
to use.
WpS(pBC)
Search
a previous
d Skip
m Move " Select
2. Select a network, and then press the v
button. The keyboard appears.
Initial Settings I Network
Security Key
Enter security key.
0 / 64
linksys3
solugen_edu#2
iptime23
solugen_edu#1
Caps
1
2
3
4
5
6
7
8
9
0
Clear
q
w
e
r
t
y
u
i
o
p
^
*
123#&
a
s
d
f
g
h
j
k
l
~
@
!
done
x
c
v
n
m
,
.
?
-
▲
Cancel
z
b
ENG
.com
◀
▶
▼
WpS(pBC)
Refresh
" Select
' Return
a previous d Skip m Move " Select
3. If your network has a password, use
the keyboard to enter it. Press the
number buttons on your remote to
enter numbers. Use the keyboard to
enter letters. If you want to display the
password as you enter it, select Show
Password on the right. When finished,
use the ▲▼◀▶ buttons to select Done,
and then press the v button. If you
have no password, go to Step 4.
4. After the player verifies the network,
press the v button.
5. Go to Step 6 on the left side of the page.
✎
NOTES
The Home screen will not appear
■
if you do not configure the initial
settings except as noted below.
If you press the BLUE (d) button
■
during network setup, you can
access the Home screen even if the
network setup is not completed yet.
When you return to the Home
■
screen, the full screen mode is
cancelled automatically.
If you want to display the Initial
■
Setting screen again to make changes,
press the ■ button on the front panel
of the player for more than 5 seconds
with no disc inserted. This resets the
player to its default settings.
After the initial settings process is
■
complete, you can operate the HDMI-
CEC function.