✎
NOTES
This function is not available if the HDMI
■
cable does not support CEC.
If your Samsung TV has an Anynet+ logo,
■
then it supports the Anynet+ function.
Depending on your TV, certain HDMI
■
output resolutions may not work.
Please refer to the user manual of
your TV.
If you have Anynet+ turned on, when
■
you turn off the product, disconnect,
and then reconnect the power cable,
the product turns on automatically to
re-establish the Anynet+ connection.
After about 15 seconds, it turns off
again automatically.
Some Samsung TVs, when connected
■
to this product using the Anynet+
function will, when you turn them
on, display a warning popup
message saying no connection has
been found. Never-the-less, the
Anynet+ connection is properly
established and available to use.
Bd data Management
Enables you to manage the downloaded
contents you accessed through a Blu-ray
disc that supports the BD-LIVE service and
stored on a flash drive.
You can check the device’s information
including the storage size, delete the BD
data, or change the Flash memory device.
✎
NOTES
In the external memory mode, disc
■
playback may be stopped if you
disconnect the USB device in the
middle of playback.
Your player supports the FAT16,
■
FAT32, and NTFS file systems. We
recommend you use USB devices that
support the USB 2.0 protocol with 4
MB/sec or faster read/write speed.
The Resume Play function may not work
■
after you format the storage device.