Troubleshooting After Startup; Repairing The Cmc - HP Console Management Controller User Manual

Troubleshooting After Startup

For problems that occur after the CMC started, these suggested actions address
possible causes.
Symptom
Audible Alarm

Repairing the CMC

Repairs to the CMC must be carried out by Compaq or a Compaq authorized
service representative. The only user-serviceable parts are the fuses located in
the rear of the unit. If the fuses have opened, verify that the condition that
caused the fault has been cleared. Replace the fuse with the exact rating as
specified on the unit label. Contact your Compaq authorized service
representative for more details.
Troubleshooting Guide (After Startup)
Possible Cause
Alarm condition exists.
WARNING: Disconnect all power cords before servicing the unit.
Table 5-2
Suggested Action
Check display or console for
error condition and clear.
Troubleshooting 5-3