i.
System board (see
j.
Heat sink (see
Remove the processor:
1.
Use a flat-bladed screw driver (1) to turn the processor locking screw one-half turn
counterclockwise, until you hear a click.
2.
Lift the processor (2) straight up, and remove it.
NOTE:
embossed on the processor socket when you install the processor.
Reverse this procedure to install the processor.
104
Chapter 4 Removal and replacement procedures
System board on page
Heat sink on page
The gold triangle (3) on the processor must be aligned with the triangle icon (4)
95)
99)