Pride Quantum litestream junior Owner's Manual page 17

NOTE: If your wheelchair is equipped with a depth-
adjustable side frame, height-adjustable armrests,
and waterfall armpads, interference may be encoun-
tered when attempting to fold the wheelchair. It may
be necessary to remove the drive wheels to fold the
wheelchair.
Transporting Your Litestream Junior
The Litestream Junior was designed to be stored in a
secure location, such as the trunk of a car, during motor
vehicle transport, unless it is equipped with an optional
transit securement system. If your wheelchair is
equipped with a transit securement system, refer to the
Transit Securement System supplement provided with
your wheelchair.
To stow the Litestream
configuration only):
1. Fold the Litestream Junior.
2. With one hand, grab and squeeze together both
push handles. See figure 9.
3. With the other hand, grab and squeeze together
both seat interface tubes.
NOTE: You can also remove the drive wheels to make
the wheelchair more compact. See "Drive Wheel
Adjustments."
WARNING! If you remove the drive
wheels, make sure the quick-release
mechanism snaps into place when
reinstalling
Wheel Adjustments."
Folding Down the Seatback of your Litestream
Junior
If your Litestream Junior is equipped with fold-forward
back canes, the back canes can be folded down for
easier transport.
To fold down the back canes on the Litestream
Junior:
1. Remove the drive wheels. See figure 13.
2. Flip up the armrests. If your wheelchair is equipped
with latching armrests, push the armrest latch
toward the front of the armrest to disengage the
armrest. You will hear a click when the armrest is
latched into place. See figure 10.
3. Push the release lever at the rear of the seat base to
fold down the seatback. See figure 11.
Litestream Junior
I I I . Y O U R W H E E L C H A I R
Junior (foldable
the wheel. See "Drive
www.pridemobility.com
Figure 9. Lifting Points
Figure 10. Armrest Latch - Latching Armrests
Figure 11. Fold-forward Back Canes
PUSH HANDLES
SEAT INTERFACE
TUBES
17