HP 3C905B-TX Installation Manual page 8

HP 10/100 3Com 3C905B-TX Network Interface Card Installation Guide
Installation Requirements
Supported Platforms
To find out on which PCs you can install a 3C905B-TX card, go to the
following HP Web sites:
For Vectra Corporate PCs
•
http://www.hp.com.go/vectraaccessories
For Kayak PC workstations
•
http://www.hp.com.go/kayakaccessories
NT Service Pack
If an NT service pack is already installed on the PC, it must be
re-installed after the Network Interface Card (NIC) and software is
installed. When using the HP preloaded NT 4.0 software, the latest
service pack can be found in the C:\I386\SP x directory.
Operating System Master Diskettes
During the software installation you will need to have your operating
system master diskettes or CD-ROM available.
When using HP preloaded operating system software, the master
diskettes can be found in the following directories:
C:\I386 (Windows NT 4.0)
•
C:\WINDOWS\OPTIONS\CABS (Windows 95)
•
4 English