HP 37717C Configuration Manual page 9

4. Wander and jitter measurement options
Choose one option (if required). If you need PDH jitter
measurement then also order PDH/DSn interface option (section 1).
PDH (tributary) jitter and wander measurement: 2, 8, 34, 140 Mb/s, with HP1, HP2 and ............... UHN
LP filters to ITU-T O.171 plus 2 Mb/s wander and estimated frame slip measurement.
STM-1e line jitter and PDH (tributary) jitter; rms, peak-to-peak, auto jitter transfer ...................... A3L
and wander measurement: 155 Mb/s electrical interface with HP1, HP2, LP and 12 kHz HP
filters to ITU-T O.171/G.825.
STM-1o/STM-1e, plus all the capability of option A3L. ............................................................................. A3V
STM-4o/STM-1o/STM-1e, plus all the capability of option A3L. ............................................................ A3N
† 8 and 140 Mb/s jitter measurement requires a PDH option with 8 and 140 Mb/s
interface to be fitted
5. ATM services layer test options
Choose one option (if required). As these modules use the interfacing provided by a
PDH/DSn and ATM test option, must also order ATM option UKN or UKZ (section 1).
Provides ATM and AAL capabilities including Channel View, rate history, ....................................... 0YK†
graphical CDV, benchmark traffic.
As per option 0YK (but occupying two slots) plus native Ethernet LAN .......................................... USL†
connectivity tests.
† Option 0YK and USL do not support options A3R and 120 at present.
Please refer to module interworking section (pages 6 and 7).
6. PDH binary interfaces options
Choose one option (if required). Must also order a PDH and ATM test option (section 1).
(Option UH3 does not support options UKZ, 0YK or USL at present.)
PDH NRZ interfaces: Adds binary Tx clock and data, binary Rx clock and data, ........................... UH3†
plus external clock input.
PDH synthesized BER testing bundle : Includes UH3 (binary clock and data), ................................ 200
UKK (unstructured BER module) and HP 8647A synthesizer.
† Option UH3 does not support options UKZ, 0YK and USL at present.
Please refer to module interworking section (pages 6 and 7).
9
Option No of Tick
code slots one
1
2
2
2
Option No of Tick
code slots one
1
2
Option No of Tick
code slots one
1
3