HP 37717C Configuration Manual page 7

Broadband ATM services supported configurations
ATM cell test
interfaces
1
Option UKN Page 8
ATM cell generation and
analysis: 2, 34 and 140 Mb/s
(includes all capability of
option UKJ structured PDH).
Option UKZ 2 Page 8
Generation and measurement
of ATM payloads: 1.544 (DS1),
44.736 (DS3), 2.048 (E1) and
34.368 (E3) Mb/s.
1
ITU-T
2
ANSI/ITU-T
ATM services
layer test
Option 0YK Page 9
Adds Channel View, graphical
display of CDV, AAL analysis,
rate history, benchmark traffic
generation. Must also order
option UKN or UKZ,
Option USL Page 9
Adds Ethernet LAN
connectivity testing plus all
features of option 0YK. Must
also order option UKN or UKZ.
† Where specified two modules may be ordered from certain categories (ie. UH3, UHC, 0YH).
* NB Jitter generation and measurement does not include DS1, DS3 and 52 Mb/s. PDH jitter depends on options fitted.
If option UKK/UKJ/UKN fitted then PDH jitter generation and measurement is provided at E1/E2/E3/E4.
If option 110 fitted then PDH jitter generation and measurement capability is provided at E1 and E3. 622 Mb/s
and 155 Mb/s jitter presented in ITU-T terminology as is specified in the HP 37717B/C communications performance
analyzer technical specifications (publication number 5966-0892E).
For compliance to Bellcore standards, please contact you local Hewlett-Packard representative for details.
STM-1e test
and interfaces
Option A1T Page 8
STM-1e (155 Mb/s) electrical
interface. Overhead access,
thru mode and pointer
sequences. TU-12, TU-2, VC-3
and VC-4 mappings.
(Provides STM-1o output
when option UKN and optical
interface option are selected.
STM-1o and OC-3c are
provided when option UKZ
and an optical interface
option are selected).
7
Optical
interfaces
Option UH1 Page 10
155 Mb/s (1310 nm).
Option USN Page 10
622/155 Mb/s (1310 and
1550 nm), optical power
measurement.
Option UKT Page 10
622/155 Mb/s (1310 nm),
optical power measurement.
Please contact your local sales
office if you require module
interworking capability not
specified here.
All modules work with UKX
(printer), A3B/A3D (remote
control) and USS (distributed
network analyzer software).
Jitter, wander and slips
testing – generation*
Option A3K Page 9
PDH, 155 Mb/s, 622 Mb/s
jitter and wander generation.
Option 140 Page 9
As option A3K but without
wander generation.
Jitter, wander and slips
testing – measurement*
Option UHN Page 9
PDH jitter measurement.
Option A3L Page 9
155 Mb/s electrical and PDH
jitter measurement.
Option A3V Page 9
155 Mb/s optical, electrical
and PDH jitter measurement.
Option A3N Page 9
622 Mb/s, 155 Mb/s optical,
electrical and PDH jitter.