Download Print this page
American Standard Tropic T038.50X Installation Instructions

American Standard Tropic T038.50X Installation Instructions

American standard pressure balancing bath and shower trim kit installation instructions

Advertisement

Quick Links

TROPIC
IN WALL PRESSURE BALANCING
BATH AND SHOWER TRIM KIT
with
EverClean™ Finish
Congratulations on purchasing your American Standard faucet
with EverClean finish found only on American Standard faucets.
EverClean Finish
• One wipe effortlessly removes spots
• Eliminates the need for cleaners and scrubbing
• Permanent surface protectant remains beautiful for the life of the faucet
• EverClean™ available on: Polished Chrome, Satin Nickel,
Stainless Steel, Polished Brass (or any combination of these finishes)
To ensure that your installation proceeds smoothly-please read these
instructions carefully before you begin.
Required Tools
Phillips Screwdriver
Flat Blade Screwdriver
ROUGHING-IN DIMENSIONS
To assure proper positioning in relation to wall,
note roughing-in dimensions.
Adjustable Wrench
4mm (5/32")
Hex Wrench
FINISHED WALL
4-1/4" REF.
6" REF.
"SEE ILLUSTRATION "
74" FOR HEAD
CLEARANCE
18" OPTIONAL
5-1/8" REF.
TOP OF TUB RIM
BOTTOM OF TUB
Installation
Instructions
T 0 3 8 . 5 0 X
Channel Locks
3/4"" TO 2-3/8"
1/2" NPT
OPTIONAL TO FINISHED
FLOOR USUALLY
BETWEEN 65'' AND 80''
SHR
7-5/8"
TUB
1-1/2" REF.
1/2" COPPER
4"
Certified to comply with ANSI A112.18.1
Plumbers' Putty or Caulking

Advertisement

loading

Summary of Contents for American Standard Tropic T038.50X

  • Page 1 BATH AND SHOWER TRIM KIT with EverClean™ Finish Congratulations on purchasing your American Standard faucet with EverClean finish found only on American Standard faucets. EverClean Finish • One wipe effortlessly removes spots • Eliminates the need for cleaners and scrubbing •...
  • Page 2 INSTALL TRIM CAUTION: Protect finish on SHOWER ARM, SHOWER HEAD and TUB SPOUT when installing. When finished tiling the wall, remove PLASTER GUARD (A) and turn off water supply. Push CAP (1) over VALVE CARTRIDGE (2). Mount ESCUTCHEON (3) and gasket to valve body with SCREWS (4). Remove PIPE CAP &...
  • Page 3 Reassemble FIXATION RING (4) and CARTRIDGE (1). EverClean™ Finish Care Instructions American Standard’s EverClean finish will wipe clean with a soft, dry cloth. A soft cloth with clean water may also be used, if desired. No additional cleaning products are required.

This manual is also suitable for:

Tropic t038.50 series