Advertisement
12 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter
Connecting to a Windows NT 4.0 Server
10 Click on the "Install Microsoft Windows Network:" option, and click "OK".
11 Click the "Drivers" button from the "Network Setup" dialog box, and click
on "Add Adapter".
12 Click "OK" to accept the default choice of "Unlisted or Updated Network
Adapter".
13 Type the path "A:\WFW" in the "Install Driver" dialog box, and then insert
the Intel EtherExpress driver disk into the floppy drive, and click "OK".
14 Select "Intel 82557-Based Ethernet PCI Adapter (10/100)" in the
"Unlisted or Updated Network Adapter" dialog box, and click "OK".
15 Make sure that the "Intel 82557-Based Ethernet PCI Adapter (10/100)" is
selected in "Network Drivers".
16 Accept the list of Protocols listed below and click on the "CLOSE" button.
17 At the "Network Setup" dialog box, click on "OK".
18 Specify your User Name, Workgroup, and Computer Name in "Microsoft
Windows Network Names" dialog box, and click on "OK".
19 Finish the network card installation by clicking on "OK" in the "Network
Setup" message.
20 To complete the installation, click on "Restart Computer" button in the
"Windows Setup" dialog box.
Advertisement
