Page of 32

HP 100B-TX Installation Manual

Hewlett-packard ethernet adapter installation guide.
Hide thumbs
Intel EtherExpress PRO 100B-TX
PCI Ethernet Adapter
Installation Guide

Advertising

   Related Manuals for HP 100B-TX

   Summary of Contents for HP 100B-TX

  • Page 1

    Intel EtherExpress PRO 100B-TX PCI Ethernet Adapter Installation Guide...

  • Page 2

    Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

  • Page 3

    Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress PRO 100B- TX PCI adapter card into an PCI slot. 2 Connect network cable media to the PRO 100B-TX PCI card. 3 Power on the machine and start Windows 95SR2.5 in MS-DOS mode.

  • Page 4

    1 Installing the Intel EtherExpress PRO 100B-TX PCI Ethernet Adapter 9 When prompted, click on “Next” and then click on “Other Locations” to provide the drivers for the Intel EtherExpress PRO 100B-TX PCI 10/100. 10 Insert the drivers diskette and set the path statement to “A:\” and click on “OK”.

  • Page 5

    Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress PRO 100B- TX PCI adapter card into an PCI slot. 2 Connect network cable media to the PRO 100B-TX PCI card. 3 Power on the machine and start Windows 95SR2.5 in MS-DOS mode.

  • Page 6

    2 Installing the Intel EtherExpress PRO 100B-TX PCI Ethernet Adapter 9 When prompted, click on “Next” and then click on “Other Locations” to provide the drivers for the Intel EtherExpress PRO 100B-TX PCI 10/100. 10 Insert the drivers diskette and set the path statement to “A:\” and click on “OK”.

  • Page 7

    Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress PRO 100B- TX PCI adapter card into an PCI slot. 2 Connect network cable media to the PRO 100B-TX PCI card. 3 Power on the machine and start Windows 95SR2.5 in MS-DOS mode.

  • Page 8

    3 Installing the Intel EtherExpress PRO 100B-TX PCI Ethernet Adapter 9 When prompted, click on “Next” and then click on “Other Locations” to provide the drivers for the Intel EtherExpress PRO 100B-TX PCI 10/100. 10 Insert the drivers diskette and set the path statement to “A:\” and click on “OK”.

  • Page 9

    Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress PRO 100B- TX PCI adapter card into an PCI slot. 2 Connect network cable media to the PRO 100B-TX PCI card. 3 Power on the machine and start Windows 95SR2.5 in MS-DOS mode.

  • Page 10

    4 Installing the Intel EtherExpress PRO 100B-TX PCI Ethernet Adapter 9 When prompted, click on “Next” and then click on “Other Locations” to provide the drivers for the Intel EtherExpress PRO 100B-TX PCI 10/100. 10 Insert the drivers diskette and set the path statement to “A:\” and click on “OK”.

  • Page 11

    Device Configuration Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress Pro 100B- TX PCI Ethernet adapter into a PCI slot. 2 Connect network cable media to the Intel EtherExpress Pro 100B-TX PCI Ethernet card.

  • Page 12

    10 With “Wired to the Network” checked, click on “Next”. 11 Click on the option to “Select from list” then on “Have Disk”. 12 Insert the Intel EtherExpress Pro 100B-TX PCI Ethernet driver disk into the floppy drive. 13 Highlight the adapter labeled “Intel 82557-Based Ethernet PCI Adapter (10/100)”...

  • Page 13

    Device Configuration Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress Pro 100B- TX PCI Ethernet adapter into a PCI slot. 2 Connect network cable media to the Intel EtherExpress Pro 100B-TX PCI Ethernet card.

  • Page 14

    10 With “Wired to the Network” checked, click on “Next”. 11 Click on the option to “Select from list” then on “Have Disk”. 12 Insert the Intel EtherExpress Pro 100B-TX PCI Ethernet driver disk into the floppy drive. 13 Highlight the adapter labeled “Intel 82557-Based Ethernet PCI Adapter (10/100)”...

  • Page 15

    Device Configuration Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress Pro 100B- TX PCI Ethernet adapter into a PCI slot. 2 Connect network cable media to the Intel EtherExpress Pro 100B-TX PCI Ethernet card.

  • Page 16

    10 With “Wired to the Network” checked, click on “Next”. 11 Click on the option to “Select from list” then on “Have Disk”. 12 Insert the Intel EtherExpress Pro 100B-TX PCI Ethernet driver disk into the floppy drive. 13 Highlight the adapter labeled “Intel 82557-Based Ethernet PCI Adapter (10/100)”...

  • Page 17

    Device Configuration Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress Pro 100B- TX PCI Ethernet adapter into a PCI slot. 2 Connect network cable media to the Intel EtherExpress Pro 100B-TX PCI Ethernet card.

  • Page 18

    10 With “Wired to the Network” checked, click on “Next”. 11 Click on the option to “Select from list” then on “Have Disk”. 12 Insert the Intel EtherExpress Pro 100B-TX PCI Ethernet driver disk into the floppy drive. 13 Highlight the adapter labeled “Intel 82557-Based Ethernet PCI Adapter (10/100)”...

  • Page 19

    Device Configuration Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress Pro 100B- TX PCI Ethernet adapter into a PCI slot. 2 Connect network cable media to the Intel EtherExpress Pro 100B-TX PCI Ethernet card.

  • Page 20

    9 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter 9 Select the “Network” icon, and click “YES” to install NT networking. 10 Insert the Windows NT Workstation CD. 11 In the “Windows NT Setup”, set the path to your NT files, and click on the “Continue”...

  • Page 21

    9 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Connecting to a Windows NT 3.51 Server 27 Insert the Intel EtherExpress Pro 100B-TX PCI Ethernet driver disk into the floppy drive. 28 Highlight the adapter labeled “Intel 82557-Based Ethernet PCI Adapter (10/100)”...

  • Page 22

    Device Configuration Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress Pro 100B- TX PCI Ethernet adapter into a PCI slot. 2 Connect network cable media to the Intel EtherExpress Pro 100B-TX PCI Ethernet card.

  • Page 23

    10 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Connecting to a Windows NT 4.0 Server 9 Select the “Network” icon, and click “YES” to install NT networking. 10 Insert the Windows NT Workstation CD. 11 In the “Windows NT Setup”, set the path to your NT files, and click on the “Continue”...

  • Page 24

    10 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter 27 Insert the Intel EtherExpress Pro 100B-TX PCI Ethernet driver disk into the floppy drive. 28 Highlight the adapter labeled “Intel 82557-Based Ethernet PCI Adapter (10/100)” and click on “OK”.

  • Page 25

    Device Configuration Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress Pro 100B- TX PCI Ethernet adapter into a PCI slot. 2 Connect network cable media to the Intel EtherExpress Pro 100B-TX PCI Ethernet card.

  • Page 26

    25 With “Wired to the Network” checked, click on “Next”. 26 Click on the option to “Select from list” then on “Have Disk”. 27 Insert the Intel EtherExpress Pro 100B-TX PCI Ethernet driver disk into the floppy drive. 28 Highlight the adapter labeled “Intel 82557-Based Ethernet PCI Adapter (10/100)”...

  • Page 27

    11 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Connecting to a Novell NetWare 4.11 Server 31 At the “Network Services:” prompt, accept default settings and click on “Next”. 32 Finish the network card installation by clicking on “Next”.

  • Page 28

    Device Configuration Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress Pro 100B- TX PCI Ethernet adapter into a PCI slot. 2 Connect network cable media to the Intel EtherExpress Pro 100B-TX PCI Ethernet card.

  • Page 29

    12 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Connecting to a Windows NT 4.0 Server 10 Click on the “Install Microsoft Windows Network:” option, and click “OK”. 11 Click the “Drivers” button from the “Network Setup” dialog box, and click on “Add Adapter”.

  • Page 30

    Device Configuration Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress Pro 100B- TX PCI Ethernet adapter into a PCI slot. 2 Connect network cable media to the Intel EtherExpress Pro 100B-TX PCI Ethernet card.

  • Page 31

    13 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Connecting to a Novell NetWare 4.11 Server 9 Select the “Networks” button in the “Network Setup” dialog box. 10 Click on the “Install Microsoft Windows Network:” option, and click “OK”.

Comments to this Manuals

Symbols: 0
Latest comments: