JVC GY-HD100E Service Manual page 46

No. Item
·
15 Tension control arm assembly,
¡
Charge arm assembly
( L16 )
30
( L15 )
29
29
Align the phase of the main cam
bosses in the cam groove.
Attaching Tension Control Arm Assembly
and Brake Control Arm Assembly
Reference picture/drawing
‚
Brake control arm assembly,
( W1 )
( L17 )
31
Fig. 2-7-15(a)
34
30
Bosses
(Phase alignment)
35
∞
then attach by fitting the
Fig. 2-7-15(b)
‚
<Removal>
1) The brake control assembly can be removed after
removing the washer (W1).
<Attaching>
1) Align the phases of the main cam and sub cam ,
then attach by reversing the removal procedure.
Refer to Fig. 2-7-15(b) and Fig. 2-7-15(c).
Bosses
(Phase alignment)
Phase alignment
Boss (Phase alignment)
Align the phase of the sub cam
attach by fitting the boss into the cam groove.
Fig. 2-7-15(c) Attaching the Charge Arm
·
Procedure
31
38
Phase
alignment
•
, then
¡
Assembly
39
2-19