JVC GY-HD100E Service Manual page 26

Setting procedure
(1) Rotate the SHUTTER dial to move the cursor to MEM.
EDIT.
(2) Push the SHUTTER dial to make the ADR parameter blink.
(3) Select ADR parameter "391".
(4) Push the SHUTTER dial to make the DATA parameter
blink.
(5) Rotate the SHUTTER dial to set the ID data for ADR =
"391".
(6) Push the SHUTTER dial to confirm the DATA parameter.
(7) In the same manner, select ADR parameter "392" and
"393" to set the ID data.
Fig. 1-5-15 ID Label Attachment Position
ID Label
1-21