JVC GY-HD100E Service Manual page 43

No. Item
!
9 Sub-deck assembly
The boss should
fit into the hole.
Phase alignment
Control plate
@
10 Main brake (SUP) assembly,
6
Sub-brake assembly
12
( P4 )
13
( P5 )
( W1 )
6
( P1 )
2-16
Reference picture/drawing
15
( S2 )
35
16
( S2 )
( S2 )
18 ( S2 )
( S2 )
( L11 )
Fig. 2-7-9
#
Main brake (TU) assembly,
( L10 )
( L11 )
Fig. 2-7-10
<Removal>
1)Remove the 5 screws (S2) and pull out the assem-
bly.
17
<Attaching>
1)While sliding the control plate toward the left, at-
tach the sub-deck assembly.
NOTE
⋅ Attach by aligning the phase holes of the
11
main deck assembly and control plate.
2) Clamp with 5 screws (S2).
<Removal>
Main brake (SUP) (TU) assembly
1)Remove the spring by disengaging its ends from
the hooks (L10) and (L11).
Sub-brake assembly
1)Remove the washer (W1).
2)Remove the spring by disengaging it from the hook
(L8).
11
<Attaching>
1)Reverse the removal procedure.
( L8 )
Procedure