HP PAVILION Pavilion ZE4300 Service Manual page 67

NOTE: This section applies only to HP Pavilion ze5x00, HP nx9010 and HP nx9008, and
Compaq Presario 2500 models.
Required Equipment
•
1 Phillips screwdriver
Removal Procedure
1. Unplug the AC adapter, if present, and then remove the battery.
2. Remove these additional assemblies:
• Hard disk drive (page 2-9)
• Keyboard cover (page 2-13)
Keyboard (page 2-16)
•
Switchboard PCA (page 2-19)
•
• Display assembly (page 2-23)
• Top case (page 2-26)
3. Remove the insulating tape that secures the floppy drive flex cable to the TouchPad bracket on
the top case.
4. Remove the four M2.5×6.0mm screws that secure the floppy drive and floppy drive bezel to
the top case.
5. Remove the floppy drive.
6. Remove the M2.0×3.0mm screw that secures the floppy drive bezel to the floppy drive.
7. Remove the floppy drive bezel.
2-34 Removal and Replacement Service Manual