Checking Painted Surface Of Motor; Periodic Maintenance; Replacement Parts; Maintenance Interval Guidelines - Yamaha 50 Owner's Manual

system with fresh water.
EMU28460

Checking painted surface of motor

Check the motor for scratches, nicks, or flak-
ing paint. Areas with damaged paint are
more likely to corrode. If necessary, clean
and paint the areas. A touch-up paint is avail-
able from your Yamaha dealer.
EMU2848A

Periodic maintenance

EWM01871
WARNING
These procedures require mechanical
skills, tools, and supplies. If you do not
have the proper skills, tools, or supplies
to perform a maintenance procedure,
have a Yamaha dealer or other qualified
mechanic do the work.
The procedures involve disassembling
the motor and exposing dangerous parts.
To reduce the risk of injury from moving,
hot, or electrical parts:
Turn off the engine and keep the key(s)
G
and engine shut-off cord (lanyard) with
you when you perform maintenance
unless otherwise specified.
The power trim and tilt switches oper-
G
ate even when the ignition key is off.
Keep people away from the switches
whenever working around the motor.
When the motor is tilted, keep away
from the area under it or between it and
the clamp bracket. Be sure no one is in
this area before operating the power
trim and tilt mechanism.
Allow the engine to cool before han-
G
dling hot parts or fluids.
Always completely reassemble the mo-
G
tor before operation.
Maintenance, replacement, or repair of
the emission control devices and sys-
ZMU03223
tems may be performed by any marine
engine repair establishment or individual.
All warranty repairs, however, including
those to the emission control system,
must be performed by an authorized
Yamaha marine dealership.
A service manual is available for purchase
through your Yamaha dealer for owners who
have the mechanical skills, tools, and other
equipment necessary to perform mainte-
nance not covered by this owner's manual.
EMU28511

Replacement parts

If replacement parts are necessary, use only
genuine Yamaha parts or parts of equivalent
design and quality. Any part of inferior quality
may malfunction, and the resulting loss of
control could endanger the operator and
passengers. Yamaha genuine parts and ac-
cessories are available from your Yamaha
dealer.
EMU35520

Maintenance interval guidelines

The service intervals provided in the Mainte-
nance Chart were developed based upon
"typical" use that includes operating at varied
speeds, with sufficient time for engine warm
up and cool-down, a medium to light load,
and an average cruising speed near the
3000 to 4000 rpm range. As with any engine,
however, if your normal operating conditions
Maintenance
57