Advertisement
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice.
registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other
brands and product names are trademarks or registered trademarks
of their respective holders.
No part of the specifications may be reproduced in any form or by
any means or used to make any derivative such as translation,
transformation, or adaptation without permission from TP-LINK
TECHNOLOGIES CO., LTD. Copyright © 2011 TP-LINK
TECHNOLOGIES CO., LTD. All rights reserved.
1
Package Contents
The following contents should be found in your box:
is a
One Internal Modem
One User's Guide
One RJ11 Cable
One Driver CD
Note: If any of the above contents is damaged or missing, please
contact the retailer from whom you purchased the TM-IP5600/TM-
IA5629V Modem for assistance.
1. Introduction
Thank you for choosing the TP-LINK internal Modem for your
personal computer. Now you can experience the high quality of
communication products for your computer application.
This manual provides the operating instruction for user installation
procedures. If you encounter any problem during the installation or
using your modem that cannot be solved with the help of this
manual, please do not hesitate to contact your dealer for technical
support.
2. Feature
Data Modem Communication Protocol:
ITU-T V.92/V .90, 56Kbps
ITU-T V.34, 33600 to 2400 bit/s
ITU-T V.32bis, V .32
ITU-T V.22bis,V .22
ITU-T V.23, V .21
Bell 212A,103
2
Fax Protocol:
ITU-T V.17, V .29, V.27ter, and V.21 Channel 2
TIA/EIA 578 class 1 FAX, Fax Speed High to 14400bps
Voice (only for TM-IA5629V):
Voice/Audio Mode
Speaker/MIC jack
Data Correct: V.42 LAPM and MNP2-4
Data Compression: V.44/V.42 bis and MNP5
Command System: EIA/TIA 578 Class 1 Concurrently Hays AT
Command
Operating System Support: Windows 98, Windows ME,
Windows2000, Windows XP, and Windows 7
Flow Control: XON/XOFF or RTS/CTS
Protect Circuit: Internal arrester circuit
V.92 and V.44 New Features:
Modem On Hold
Quick Connect
PCM UP Stream
V.44 Data Compression
Note: V.92 and V.44 function need network support.
3.
Hardware Installation
The basic steps for hardware installation is as follows:
1)
Turn off your computer. Then open the case of your Computer.
2)
Put off the metal cover on the PCI bus slot whic h you would like to
install the modem.
3
Advertisement
