Turning On The Power; Initial Setup - Toshiba AT300SE Series User Manual

2.
3.

Turning on the power

This section describes how to power up your tablet.
Press & hold Power button for two seconds and the LED indicator will glow
white for two seconds to indicate that the tablet is on.

Initial Setup

The Setup Screen will be the first screen displayed when you turn on the
power. Setup your tablet according to the following steps:
1.
2.
User's Manual
Plug the other smaller connector of the USB cable into the Micro USB
port on your tablet.
Figure 3-4 Connecting the AC adaptor 2
Plug the AC adaptor into a live wall outlet.
Wall outlet
The fastest way to charge your tablet is with the included AC adaptor
plugged into a wall outlet.
USB charge
In "suspend or shutdown mode," you can also charge your tablet,
although more slowly, by connecting the USB cable to the USB port
on your PC. Please make sure your PC is turned ON while charging
via USB. If your PC is turned OFF, depending on PC specifications,
the tablet battery may discharge. We recommend that you do not use
your tablet while charging via USB as auto shutdown may occur if the
battery charge is too low.
Choose your preferred system language and tap Start to start the
initial setup process.
Connect to a Wi-Fi network.
You can tap Skip and turn Wi-Fi on later in Settings app.
Figure 3-5 Turn on the tablet
TOSHIBA AT300SE series
3-8