HP Compaq nx9600 Maintenance And Service Manual page 32

Troubleshooting
Flowchart 2.2—No Power, Part 1
No power
(power LED
is off).
Remove from
expansion base
(if applicable).
Power up
on battery
power?
Y
Power up
on AC
power?
Y
Power up in
docking
device?
N
1. Reseat the power cables in the
expansion base and at the AC outlet.
2. Ensure the AC power source is active.
3. Ensure that the power strip is working.
Done
2–8
N
Reset
power.*
N
Reset
power.*
Y
Done
Y
Power up
in expansion
base?
Power up
on battery
power?
Y
Power up
on AC
power?
Y
*NOTES
1. On select models, there is a separate
reset button.
2. On select models, the notebook can be
reset using the standby switch and
either the lid switch or the main power
switch.
N
Go to
"Flowchart
2.8—Nonfunctioning
Expansion Base (if
applicable)."
Maintenance and Service Guide
N
Go to
"Flowchart
2.3—No Power,
Part 2."
N
Go to
"Flowchart
2.4—No Power,
Part 3."