Rear View Connections - Sceptre X320 User Manual

Rear View Connections

HEADPHONE – This connection is for headphones to be attached to the TV.
1.
2. Audio In - This connection port is for people who want to provide audio to the
TV when using a PC or a DVI video device. The sources use 3.5mm mini-jack
audio cable.
TV – This connection is for digital or analog cable without the cable box or
3.
over-the-airwave antennas. The tuner is a hybrid tuner that tunes to both
analog and digital channels. This connection uses coaxial RF cable. For
over-the airwave digital stations please check http://www.antennaweb.org.
4. VGA - This connection port connects to a PC for video using VGA cable. Be
sure to connect your audio cable to the VGA Stereo input if you want sound
out of VGA video source.
YPbPr – This connection port is for DVD players or satellite / cable set-top
5.
boxes that use component cables. From left to right, connect green, blue,
and red for video, and then connect white for left channel audio, and red for
right channel audio. This port shares the audio jacks with Video.
Video – Video connects to devices that use composite video cables such as
6.
VCR or DVD player or Wii™. Connect the yellow for video and the red / white
for audio. This port shares the audio jacks with YPbPr.
Analog Audio Out – This connection is for connecting to analog audio
7.
receivers.
HDMI1-3 – HDMI connects to devices that use HDMI cable, such as Blu-ray
8.
or HD DVD player, or HD cable / satellite set-top box. This connection port
- 12 -
www.SCEPTRE.com
SCEPTRE X320 HDTV User Manual