Advertisement

IMPORTANT SAFETY INSTRUCTIONS

Electricity is used to perform many useful functions, but it can also cause personal injuries and property
damage if improperly handled. This product has been engineered and manufactured with the highest
priority on safety. However, improper use can result in electric shock and / or fire. In order to prevent
potential danger, please observe the following instructions when installing, operating and cleaning the
product. To ensure your safety and prolong the service life of your Liquid Crystal Television, please read
the following precautions carefully before using the product.
Read these instructions.
1.
Keep these instructions.
2.
Heed all warnings.
3.
Follow all instructions.
4.
Do not use this apparatus near water.
5.
Clean only with dry cloth.
6.
Do not block any ventilation openings. Install in accordance with the manufacturer's
7.
instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
8.
apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
9.
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade and the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
Protect the power cord from being walked on or pinched particularly at the plugs, convenience
10.
receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
11.
12.
Unplug this apparatus during lightening storms or when unused for long periods of time.
13.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus
14.
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.

PACKAGE CONTENTS

SCEPTRE Display x 1
Display Foot x 2
User Guide x 1
Screws x 4(B4x14F mm)
Power Cord x 1 (Attached)
Warranty Card x 1
Display Remote Control (AAA Batteries included) x 1
TV53DC
X43 Series User Guide
Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
FSR Series
Page | 1
8 1 4 4 0 2 3 0 2 0 0 9 7 C

Advertisement

Table of Contents
loading

Summary of Contents for Sceptre X43 Series

  • Page 1: Important Safety Instructions

    X43 Series User Guide IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and / or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product.
  • Page 2 ATTACHING & REMOVING THE BASE Place the display unit flat on a table. Afterwards attach the plastic feet onto the bottom of the TV. Install the foot labeled L to the left side of the TV (when you are facing the front of the TV). Install the foot labeled R to the right side of the TV (when you are facing the front of the TV).
  • Page 3: Rear View Mounting Pattern

    Rear View Mounting Pattern Mounting Specification: 200mm x 100mm using screw size M6. Length of screw should not exceed 8mm. Please Note: The 8mm length of screw refers to how deep the screw can go inside the mounting holes. When you’re buying screws, you should add the original 10mm to the thickness of your mounting plate in order to get the total screw length.
  • Page 4: Connecting Your Cables

    The following picture offers a suggestion for connecting most of your audio video equipment. TV Tuner is optional. It may or may not be equipped in your product. Please check with the authorized seller, authorized distributor or Sceptre Customer Service for further information. FSR Series...
  • Page 5: Ready To Watch Some Tv? (Optional)

    Ready to Watch Some TV? (Optional) Make sure your power cable is connected and the standby red light in the front of the HDTV is lit up. Check all your connection cables off the side or the back of your HDTV and also your AV devices.
  • Page 6 If You’ve Connected Cable or Satellite Set-top Boxes to the HDTV… Press the button on the side of the HD Display or the SOURCE button on the remote control and you will see the picture above. Use ▲▼ buttons to select the source you want to switch to and press the ENTER button in the middle of the ▲▼...
  • Page 7: Sceptre Remote Control

    SCEPTRE Remote Control Please insert two AAA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Afterwards, re-attach the battery cover.
  • Page 8 This remote control follows SONY’s universal remote code. To find the actual code you need to consult your cable or satellite tech support. FSR Series Page | 8...
  • Page 9 28. C – This button has no function assigned. 29. D – This button has no function assigned. Please Note:  Buttons encircled by the word SOUND BAR are to be used with a Sceptre’s sound bar only. FSR Series Page | 9...
  • Page 10: Voice Guidance

    For technical help, contact our Technical Support Group via email or phone. Please have your Product Number (P/N), Serial Number (S/N), and date of purchase available before you call. Operation Hours : Mon - Fri at 8:30 AM – 5:30 PM (PST) Tech Support E-mail: SceptreTS@Sceptre.com Customer Service Email: SceptreCS@Sceptre.com TEL : 1800-788-2878...
  • Page 11: Fcc Compliance

    FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: This device may not cause harmful interference This device must accept any interference received, including interference that may cause undesired operation. Please Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 12: Disclaimer, Trademarks, & Copyright Information

    SCEPTRE is a trademark or registered trademark of Sceptre Group.  Sceptre, Inc. shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.

Table of Contents