Component Replacement Procedures; Computer Feet - HP MINI 2102 Maintenance And Service Manual

Component replacement procedures

This chapter provides removal and replacement procedures.
There are as many as 33 screws, in 5 different sizes, that must be removed, replaced, or loosened
when servicing the computer. Make special note of each screw size and location during removal and
replacement.

Computer feet

The computer feet are adhesive-backed rubber pads. The feet are included in the Rubber Feet Kit, spare
part number 589680-001. There are 4 rubber feet that attach to the base enclosure in the locations
shown in the following illustration.
Component replacement procedures 37