Kenmore 90111 Use & Care Manual page 21

Heat Diffusers
12
Place heat diffusers over burners by inserting tabs into slots in front of firebox. Opposite ends of
heat diffusers rest on pins in back of firebox.
Cooking Grate and Swing Away
13
Place cooking grates onto grate rests.
Insert ends of Swing Away pivot wire into holes in sides of grill lid. Insert ends of Swing Away leg
wire into holes in sides of firebox. NOTE: Pivot and leg wires, running side-to-side, should be under
wires running front-to-back. If pivot and leg wires are on top, Swing Away is installed upside-down.
Unscrew ignitor cap and place AA battery into ignitor slot with positive end (+) facing outward.
Screw ignitor cap onto ignitor.
Pivot Wire
+
–
Pin
Swing Away
Leg Wire
Cooking Grate
AA Battery
466220111 • 21