Axis 5470e User Manual page 38
High performance multi-protocol print servers for virtually all networks
Hide thumbs
Also See for AXIS 5470e:
- User manual (267 pages) ,
- Specification (6 pages) ,
- Brochure (2 pages)
Table of Contents
Advertisement
Section 3: Basic Installation
38
AXIS 670e
Token Ring
Print Servers
1. Start a DOS window.
2. Type the following commands:
arp -s 802.5 <IP address> <Node address>
ping <IP address>
arp -d <IP address>
Example
arp -s 802.5 192.168.3.191 00-02-31-48-00-61
ping 192.168.3.191
arp -d 192.168.3.191
The host will return Reply from 192.168.3.191 ... or a
similar message. This indicates that the address has been set and that
communication is established.
Notes:
•
The Node address is equal to the serial number, which can be found on the
underside label of the AXIS 670e.
•
When using the Windows 95 implementation of ARP, change the first line to:
arp -s <IP address> <Ethernet address>
<w95host IP address> ,
address>
is the IP address of your Windows 95 host.
•
When you execute the ping command for the first time, you will experience
a significantly longer response time than is usual.
•
By using the arp -d command, the static entry in the arp table is removed
from the host's cache memory.
AXIS 5470e/570/670e User's Manual
<w95host IP
where
Advertisement
Table of Contents
