Table of Contents
Advertisement
TD-W8968
To filter wireless users by MAC Address, click Enable. The default setting is Disabled.
MAC Address: The wireless station's MAC address that you want to filter.
Status: The status of this entry, either Enabled or Disabled.
Description: A simple description of the wireless station.
To Add a Wireless MAC Address filtering entry, click the Add New button. The following page will
appear, shown in Figure 4-37:
To add or modify a MAC Address Filtering entry, follow these instructions:
1.
Enter the appropriate MAC Address into the MAC Address field. The format of the MAC
Address
is
XX:XX:XX:XX:XX:XX
00:1D:0F:11:22:33.
2.
Give a simple description for the wireless station in the Description field. For example:
Wireless station A.
3.
Select Enabled or Disabled for this entry on the Status drop-down list.
4.
Click the Save button to save this entry.
To edit or delete an existing entry:
1.
Click the Edit in the entry you want to modify.
2.
Modify the information.
3.
Click the Save button.
Click the Enable/ Disabled Selected button to make selected entries enabled or disabled.
300Mbps Wireless N USB ADSL2+ Modem Router User Guide
Figure 4-36
Figure 4-37
(X
is
any
54
hexadecimal
digit).
For
example:
Hide quick links:
Advertisement
Table of Contents
