TP-Link TD-W8968 User Manual page 61

TD-W8968
Disable Wireless Security: If you do not want to use wireless security, check this radio
button. But it's strongly recommended to choose one of the following modes to enable
security.
WPA/WPA2 - Personal: It's the WPA/WPA2 authentication type based on pre-shared
passphrase.
• Authentication Type - You can choose the version of the WPA-Personal security on the
drop-down list. The default setting is Automatic, which can select WPA-Personal
(Pre-shared key of WPA) or WPA2-Personal (Pre-shared key of WPA) automatically based
on the wireless station's capability and request.
• Encryption - You can select either Auto, or TKIP or AES.
• Wireless Password - You can enter ASCII characters between 8 and 63 characters or 8 to
64 Hexadecimal characters.
• Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
WPA/WPA2 – Enterprise: It's based on Radius Server.
• Authentication Type: You can choose the version of the WPA security on the drop-down
list. The default setting is Auto, which can select WPA (Wi-Fi Protected Access) or WPA2
(WPA version 2) automatically based on the wireless station's capability and request.
• Encryption - You can select either Auto, or TKIP or AES.
• RADIUS Server IP - Enter the IP address of the Radius Server.
• RADIUS Server Port - Enter the port that radius service used.
• RADIUS Server Password - Enter the password for the Radius Server.
• Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
300Mbps Wireless N USB ADSL2+ Modem Router User Guide
52