TP-Link TL-WR1043ND User Manual page 82

There are two methods to add a new rule.
Method One:
1. Click Setup Wizard button and the next screen will appear as shown in Figure 4-65.
 Host Description - In this field, create a unique description for the host (e.g. Host_1).
 Mode - Here are two options, IP Address and MAC Address. You can select either of
them from the drop-down list.
If the IP Address is selected, you can see the following item:
 LAN IP Address - Enter the IP address or address range of the host in dotted-decimal
format (e.g. 192.168.0.23).
If the MAC Address is selected, you can see the following item:
 MAC Address - Enter the MAC address of the host in XX-XX-XX-XX-XX-XX format (e.g.
00-11-22-33-44-AA).
2. Click Next when finishing creating the host entry, and the next screen will appear as shown in
Figure 4-66.
TL-WR1043ND
Figure 4-65 Quick Setup – Create a Host Entry
-72-
300Mbps Wireless N Gigabit Router