Tape Playback; Maintenance - Scott SWM1070 Instruction Manual

TAPE PLAYBACK

1 . Set to TAPE
FUNCTION
TAPE
2 . Insert the cassette.
RECORDING
USE ONLY NORMAL ( TYPE I ) TAPE FOR RECORDING.
1 . Insert the cassette tape.
2 . Press the PAUSE button.
PAUSE
3 . Press the RECORD
RECORD

MAINTENANCE

CLEANING CD
If the CD skips or will not play , the disc may need cleaning
. Before playing, wipe the disc from the centre out with a
cleaning cloth. After playing, store the disc in its case.
4 .
5 .
TO STOP RECORDING
Press the STOP / EJECT button.
TO INTERRUPT RECORDING
button.
Press the PAUSE button.
To resume recording, press the PAUSE button again.
TO ERASE A RECORDED TAPE
1.
2.
3.
GB 5
3 . Press the PLAY button.
TO STOP PLAYBACK
Press the STOP / EJECT button.
TO INTERRUPT PLAYBACK
Press the PAUSE button.
To resume play, press the PAUSE button again.
TO FAST WIND
Press the REWIND or F.FWD button. Press the STOP/
EJECT button to stop winding at the desired position.
Prepare to play the source to be recorded and play it.
Recording from a CD Recording from the radio
FUNCTION
CD/USB
PLAY THE CD/USB
Press the PAUSE button.
Set the FUNCTION selector to TAPE.
Insert a tape with the side you want to erase facing you.
Press the RECORD button to start erasing.
CLEANING THE CD LENS
If the CD lens is dusty, clean it with a brush-blower. Blow
several times on the lens and remove the dust with the
brush. Finger prints may be removed with a cotton swab
moistened with alcohol.
PLAY
FUNCTION
RADIO
TUNE INTO A STATION
PAUSE