System Agent Configuration - Asus SABERTOOTH Z97 MARK 2 User Manual

3.6.4

System Agent Configuration

Graphics Configuration
This item allows you to select a primary display from CPU and PCIe graphical devices.
Primary Display [Auto]
This item allows you to select the primary display from CPU and PCIe devices.
Configuration options: [Auto] [CPU Graphics] [PCIE]
CPU Graphics Multi-Monitor [Disabled]
This item allows you to enable the iGPU Multi-Monitor. The iGPU shared system
memory size is fixed 64 MB.
Configuration options: [Disabled] [Enabled]
DMI Configuration
This item allows you to control various DMI (direct media interface) to run at PCI-E 2.0 speed.
DMI Gen 2 [Enabled]
Set this item to [Enabled] to run DMI at PCI-E 2.0 speed.
Configuration options: [Enabled] [Disabled]
NB PCIe Configuration
This item allows you to configure the NB PCI Express settings.
PCIEx16_1/2 Link Speed [Auto]
This item allows you to configure the PCIEx16 speed for slots 1 and 2.
Configuration options: [Auto] [Gen1] [Gen2] [Gen3]
Memory Configuration
This item allows you to configure the memory configuration parameters.
Memory Scrambler [Enabled]
Set this item to [Enabled] to support high frequency DRAMs for a better stability.
Configuration options: [Enabled] [Disabled]
Memory Remap [Enabled]
Set this item to [Enabled] to support DRAM address remapping for 64-bit operating
systems.
Configuration options: [Enabled] [Disabled]
ASUS SABERTOOTH Z97 MARK 2
3-37