INtrodUCtIoN Thank you for purchasing the MANHATTAN USB Game Port Adapter, Model 168199. This ® converter extends from your PC’s USB port to support all conventional analog game controllers, and meets USB V1.0 specifications. The USB Game Port Adapter is built with a unique four-mode selectable switch for maximum compatibility and flexibility, enabling you to convert your conventional analog controllers (joysticks/gamepads) to powerful USB controllers.
SYStem reQUIremeNtS • Analog Game Controller • USB 1.1 or 2.0 port • Windows 98, 2000 or XP INStaLLatIoN 1. Plug your 15-pin D-type connector into the Manhattan USB Game Port Adapter. 2. Plug the USB Game Port Adapter connector to the USB port on the PC. 3. The operating system will detect the new hardware installation and "Add New Hardware Wizard" will run automatically. Follow the steps that appear on screen to complete the installation. 4. When the installation procedure is complete, proceed with the calibration and test for your controller. (Refer to Set up USB Game Port Adapter under Windows OS.)
Page 4
SetUP Calibrate your controller according to the following steps: A. Select "Start" at the very left bottom of your Windows screen; then choose "Setting/Control Panel." B. Select "Game controllers." C. If your controller has been properly installed, you will see "USB Adaptor Mode 1, 2, 3, 4" (Mode will be verified depending on the mode you choose); and the status will be "OK" on the "Game controllers" screen. Select "Properties" to complete the calibration for your controller. D. Click "Calibrate." E. When the calibration screen appears, follow the on-screen instructions to complete the calibration for your controller. 1. Set the controller’s center position; press button "A."...
Page 5
3. Repeat step 1; press button "A." 4. Calibrate the throttle’s maximum and minimum settings; press button "A." 5. Calibrate the rudder’s maximum and minimum settings; press button "A." Note: If the Mode switch is set at Mode 1, 3 or 4, the rudder function is disabled. This step can be skipped. 6. Calibrate the POV by pushing "Up," "Right," "Down" and "Left"; then press "Enter." Note: If the Mode switch is set at Mode 3 or 4, the throttle function is disabled. This step can be skipped.
Page 6
INStrUCtIoNS The Manhattan USB Game Port Adapter is designed to upgrade conventional PC game port analog game controllers to USB gaming devices. It is designed with a four-mode switch; however, before switching from one mode to another, follow these steps: A. Connect your 15-pin D-type game device to the USB Game Port Adapter.