Table of Contents
Advertisement
Reduce the spin speed by pressing button 3
By selecting a programme, the appliance proposes auto-
matically the maximum spin speed provided for that pro-
gramme.
Press button 3 repeatedly to change the spin speed, if you
want your laundry to be spun at a different speed.
Select an additional rinse
This appliance is designed for saving water. However, for
people with a very delicate skin (allergic to detergents) it
may be necessary to rinse the laundry using an extra
quantity of water (Extra Rinse). To activate this option
press simultaneously the buttons 4 and 6 for some sec-
onds. The Extra Rinse icon will appear on the display. This
function stays permanently on. To remove it press the
buttons 4 and 6 again until the Extra Rinse icon disap-
pears.
Select the Delay Start by pressing the buttons 9
Before you start the programme, if you wish to delay the
start, press the buttons 9 up or down repeatedly, to select
the desired delay. The corresponding icon (see "Display"
7.13 ) will appear in the upper part of the display.
The selected delay time value (up to 20 hours) will appear
on the display a few seconds, then the duration of the
programme will appear again.
You must select this option after you have set the pro-
gramme and before you press button 8 .
You can cancel or modify the delay time at any moment,
before you press button 8 .
Selecting the delayed start:
1. Select the programme and the required options.
2. Select the delay start by pressing the button 9 .
3. Press button 8 :
– the machine starts its hourly countdown.
– The programme will start after the selected delay
has expired.
Cancelling the delayed start after having pressed button
8 :
1. Set the washing machine to PAUSE by pressing but-
ton 8 .
2. Press one of the buttons 9 until the symbol
displayed
3. Press button 8 again to start the programme.
Important! The selected delay can be changed only after
selecting the washing programme again.
The Delay Start cannot be selected with DRAIN
programme.
Start the programme by pressing button 8
To start the selected programme, press the button 8 , the
green pilot light of the button 8 stops blinking.
To interrupt a programme which is running, press the
button 8 : the green pilot light starts blinking.
To restart the programme from the point at which it was
interrupted, press the button 8 again . If you have chosen
a delayed start, the machine will begin the countdown. If
an incorrect option is selected, the red pilot light of the
button 8 blinks for 3 times the message Err is displayed
for a few seconds.
Altering an option or a running programme
It is possible to change some options before the pro-
gramme carries them out .
Before you make any change, you must PAUSE the ap-
pliance by pressing the button 8 .
Changing a running programme is possible only by re-
setting it. Turn the programme selector dial to
then to the new programme position. Start the new pro-
gramme by pressing the button 8 again. The washing wa-
ter in the tub will be not emptied out.
Interrupting a programme
Press the button 8 to interrupt a programme which is
running, the corresponding green pilot light starts blink-
ing.
Press the button again to restart the programme.
Cancelling a programme
Turn the selector dial to
is running.
You can select now a new programme.
Opening the door
After the programme has started (or during the delay time)
the door is locked, if you need to open it, set first the
machine to PAUSE by pressing the button 8 .
If the door cannot be opened, this means that the machine
is already heating or that the water level is too high. Do
not try to force the door!
' is
During drying phase the door can be opened only the first
10 minutes and at the end of drying (after Anti-Crease
phase).
If you cannot open the door but you need to open it you
have to switch the machine off by turning the selector dial
and
to cancel a programme which
9
Advertisement
Table of Contents
