Replacing The Computer Access Panel - HP 6000 Hardware Reference Manual

Replacing the Computer Access Panel

1. Slide the lip on the front end of the access panel under the lip on the front of the chassis (1) then
press the back end of the access panel onto the unit (2).
Figure 2-2
2. Ensure that the panel is completely closed (1) and tighten the two thumbscrews that secure the
access panel to the chassis (2).
Figure 2-3
10 Chapter 2 Hardware Upgrades
Replacing the Computer Access Panel
Tightening the Access Panel Thumbscrews
ENWW