Advertisement
Quick Links
T M
BATH AND SHOWER TRIM KITS
Thank you for selecting American-Standard...the benchmark
of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--
please read these instructions carefully before you begin.
RECOMMENDED TOOLS
Phillips Screwdriver
ROUGHING-IN DIMENSIONS
FOR REFERENCE ONLY
Flat Blade Screwdriver
FINISHED WALL
4" REF.
7" REF.
74" FOR HEAD
CLEARANCE
5-1/8" REF.
TOP OF TUB RIM
BOTTOM OF TUB
Installation
Instructions
T480.508
T480.507
Plumbers' Putty or Caulking
1-5/8" TO 3-1/4"
1/2" NPT
OPTIONAL TO FINISHED
FLOOR USUALLY
BETWEEN 65'' AND 78''
4" REF.
1/2" COPPER
Certified to comply with ANSI A112.18.1
U.S. Patent No. D403,750
M 9 6 8 6 9 8
Adjustable Wrench
Teflon Tape
Advertisement
Related Manuals for American Standard Seva T480.507
Summary of Contents for American Standard Seva T480.507
- Page 1 BATH AND SHOWER TRIM KITS Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly-- please read these instructions carefully before you begin. RECOMMENDED TOOLS Flat Blade Screwdriver Phillips Screwdriver ROUGHING-IN DIMENSIONS FOR REFERENCE ONLY 4"...
- Page 2 INSTALL TRIM Remove PLASTER GUARD (1). Push CAP (2) on valve, place ESCUTCHEON (3) and attach with SCREWS (4). Install HANDLE (5) by pushing it onto CARTRIDGE STEM (6) and tightening SET SCREW (7) from below. Install SHOWER ARM (8) with FLANGE (9). Check proper operation of HANDLE (5) and DIVERTER SPOUT (11).
- Page 3 ADJUST HOT LIMIT STOP HOT LIMIT SAFETY STOP ADJUSTMENT By restricting handle rotation and limiting the amount of hot water allowed to mix with the cold, the HOT LIMIT SAFETY STOP reduces risk of accidental scalding. To set the maximum hot water temperature of your faucets, all you need to do is adjust the setting on the HOT LIMIT SAFETY STOP .