Use; The Control Panel - Electrolux EDC 506 E Instruction Booklet

Use

The control panel

1 Door opening button
To open door, press this button. Should the door be
opened while the appliance is working, the tumble
dryer will stop functioning.
2 Low temperature button
Press this button to reduce drying temperature.
This option should be used only when drying
synthetics with a time controlled programme.
3 Buzzer OFF button
During the anti-crease phase, the buzzer will sound.
Press this button to switch the sound off.
Important: If the water container is full, the buzzer
will sound even if this button has been depressed.
4 Start button
After selecting the programme or drying time depress
this button to start the appliance.
Should the door be opened while appliance is
drying, the START button has to be depressed
again after closing the door to allow the
programme to continue.
This button must be depressed also after a power
failure and after having re-inserted the water
container, if it has been emptied during the drying
programme.
1 2 3 4 5 6
5 "Drying" light
This light indicates that the machine is performing
the drying programme.
6 "Cooling" light
This light will illuminate when the cooling phase is in
operation.
A cooling phase of 9 minutes is performed at the end
of the drying programme before the anti-crease
phase.
7 "End of programme" light
This light flashes (alternately to
of the programme (after the cooling phase) and
continues to flash during the anti-crease phase to
remind you that filter needs cleaning and water
container must be emptied. It goes out when you
open the door or turn the programme selector dial to
"0".
8 "Water container full" light
This light flashes when the container is full.
8
EDC 506 E
7 8 9 10
light) at the end