Table of Contents
Advertisement
16
The table to the right describes some
of the situations you may experience
with the DVB–T/S module, and what
to do to resolve these situations.
What to do if ...
If ...
You hear of a new channel or
station and wish to find it ...
When you choose a channel
number, the screen is black ...
When you choose a channel
number, the information display
shows "CHANNEL NOT FOUND" ...
You want to store the channel
you are currently watching or the
station you are currently listening
to in a Group ...
You want to use satellite as the
source in a Timer Play ...
You have forgotten your code for
access control ...
You wish to add a satellite to the
already preset, available
satellites ...
You want to restrict the access to
certain channels or stations,
(ACCESS CONTROL) ...
You have deleted channels or
stations from the lists but they
reappear ...
Then ...
Check for information from the programme provider and make a
channel search.
Bring up the DVB–T/S SETUP menu>CHANNELS>SEARCH. Note
that when you find new channels or stations, they will be placed
under the relevant programme provider.
The programme provider has probably moved the channel or
station. Check for information from the programme provider
and do a manual search for a specific channel or station if you
have information about, for example, a new frequency.
Otherwise make an automatic channel or station search.
Bring up the DVB–T/S SETUP menu>CHANNELS>SEARCH.
Note that when you find new channels or stations, they will be
placed under the relevant programme provider.
It could be that you have selected a channel that does not
broadcast around the clock. When no programme is broadcast,
the information display will show 'CHANNEL NOT FOUND".
Bring up the third level of programme information and press the
yellow button to add the current channel or station to a Group
and follow the instructions in the menus.
Follow the procedure described in the User's Guide for your
television.
Choose DTV or DTV-RADIO as the source of your Timer Play.
Bring up the DVB–T/S SETUP menu>ACCESS CONTROL and
enter '9999' three times (for further information see page 12).
Contact your Bang & Olufsen retailer.
Bring up the DVB–T/S SETUP menu>ACCESS
CONTROL>PARENTAL LOCK.
Enable the access code. In the channels or stations lists you
select the channels or stations that should be 'locked' (for
further information, see page 12).
Active channels and stations cannot be deleted from the total
lists, only inactive channels or stations can be deleted. If you
delete active channels or stations, they will reappear in the lists
when the broadcaster sends out information again.
Advertisement
Table of Contents
