ADT SASW3000EN User Manual page 20

Use t
his key when you want to arm your system with one or more zones intentionally
unprotected.
Vent Zones: Your system may have certain windows set as "vent" zones, which are
automatically bypassed if left open when arming the system (you do not need to
manually bypass them). However, if a vent zone window is closed after arming, it
becomes protected and will cause an alarm if opened again while the system is armed.
When bypassing zones:
• The system must be disarmed before you can bypass zones.
• Bypassed zones are unprotected and will not cause an alarm if violated.
•
The system will not allow fire zones to be bypassed.
• Zones are automatically unbypassed when the system is disarmed.
1.
(Security Code)
Enter the 2-digit zone number(s) for the zone(s) to be
bypassed (e.g., 06, 10, 13, etc.). Single digit zone
numbers must be preceded by a zero (e.g. 05, 06).
2. When finished, the touchpad will momentarily
display a "Bypass" message for each bypassed zone
number. Wait for all bypassed zones to be displayed.
Arm the system as usual.
To display bypassed zones prior to arming, enter
your security code and press the [6] BYPASS key.
– 20 –
+ 6 + zone numbers (see below)
BYPASS
(-7%61)(  46)77
 83 7,3; *%9087
English Display: NOT READY
(-7%61)( &=4%77
6)%(= 83 %61
English Display: BYPASS