ADT SASW3000EN User Manual page 14

∗
B
efore arming your system, all protected doors, windows and other protection zones
must be closed or bypassed, otherwise the touchpad will display a "Not Ready" message.
1. Press [∗] READY (do not enter code first) to display
faulted zones.
2. Secure or bypass the zones displayed.
The touchpad's READY indicator lights when all
3.
protection zones have been either closed or bypassed.
4. Arm the system as desired.
Voice Status: Voice Touchpads (if installed), can announce system status and faulted
zones (up to 3 zone descriptors) if the Voice Status feature is turned on.
To turn the Voice Status feature on/off:
(also turns on Voice Chime mode; see Chime mode section)
To announce Status: Press [∗] STATUS key once.
To announce faulted zones: Press the [∗] STATUS key a second time within 5
seconds of the first press.
– 14 –
Custom Display:
(-7%61)(  46)77
83 7,3; *%9087
English Display:
Zone no. and "NOT READY"
# + 0 + 2 + 4
∗