Advertisement
Data Sheet
Fujitsu PRIMERGY RX200 S7 Dual socket 1 U rack server
Memory notes
Memory options
Memory options
Interfaces
USB ports
Graphics (15-pin)
LAN / Ethernet
Service LAN (RJ45)
Status LEDs
Onboard or integrated Controller
RAID controller
SATA Controller
LAN Controller
Remote Management Controller
Trusted Platform Module (TPM)
Slots
PCI-Express 3.0 x8
PCI-Express 3.0 x16
Slot Notes
Storage drive bays
Accessible drive bays
Notes accessible drives
Drive bays (Base unit specific)
Storage drive bays
General system information
Number of fans
Page 4 / 9
Max. 8 memory modules/CPU with UDIMM (low voltage or standard) OR quad-rank RDIMM; max. 12 memory
modules/CPU with single or dual-rank RDIMM or single, dual-rank or quad-rank Load-Reduced (LR) DIMM.
Memory Mirroring with identical modules in both channel pairs of a bank (4 modules per bank), Rank sparing or
Performance Mode with identical modules in all four channels (4 modules per bank).
4 GB (1 module(s) 4 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
4 GB (1 module(s) 4 GB) DDR3 LV, registered, ECC, 1600 MHz, PC3-12800, DIMM
8 GB (1 module(s) 8 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (1 module(s) 8 GB) DDR3 LV, registered, ECC, 1600 MHz, PC3-12800, DIMM
16 GB (1 module(s) 16 GB) DDR3 LR LV, registered, ECC, 1333 MHz, PC3-10600, LRDIMM
16 GB (1 module(s) 16 GB) DDR3 LV, registered, ECC, 1600 MHz, PC3-12800, DIMM
32 GB (1 module(s) 32 GB) DDR3 LR LV, registered, ECC, 1333 MHz, PC3-10600, LRDIMM
2 GB (1 module(s) 2 GB) DDR3 LV, unbuffered, ECC, 1600 MHz, PC3-12800, DIMM
4 GB (1 module(s) 4 GB) DDR3 LV, unbuffered, ECC, 1600 MHz, PC3-12800, DIMM
6 x USB 2.0 (2x front, 3x rear, 1x uSSD)
2 x VGA (thereof 1x front optional)
2 x Gbit/s Ethernet (RJ45) with upgrade options for additional 2x1 Gbit/s (RJ45), 4x 1 Gbit/s (RJ45) or 2x 10 Gbit/s
(SFP+)
1 x dedicated management LAN port for iRMC S3 (10/100/1000 Mbit/s)
Service LAN traffic can be switched to shared onboard Gbit LAN port
or optional Modular LAN 2x10Gbit controller
Front management LAN port as option
System status (orange / yellow)
Identification (blue)
Hard disks access (green)
Power (amber / green)
At system rear side:
System status (orange / yellow)
Identification (blue)
LAN connection (green)
LAN speed (green / yellow)
4 port for internal 3G SATA and SAS (as upgrade option "Patsburg B") for HDDs with RAID 0/1/10 (Intel C600)
See under Components RAID controller
Intel® C600, 1 x SATA channel for ODD
Intel® Ethernet Controller I350, 2 x 10/100/1000 Mbit/s Ethernet (I/O acceleration), Modular integrated on-board LAN
offers upgrade options for additional 2x1 Gbit/s , 4x 1 Gbit/s or 2x 10 Gbit/s.
PXE-Boot via LAN from PXE server, iSCSI boot (also diskless)
Integrated Remote Management Controller (iRMC S3, 32 MB attached memory incl. graphics controller), IPMI 2.0
compatible
Infineon / separate module; TCG V1.2 compliant (option)
3 x Low profile
1 x Low profile
One PCIe Gen3 x8 slot may be occupied with a Modular integrated on-board LAN controller if configured.
One PCIe Gen3 x8 slot may be occupied with a Modular RAID controller if configured
4 x 2.5-inch base unit or 8 x 2.5-inch base unit
1 x 5.25/0.5-inch for DVD-RW/Blu-ray (only for base unit 4x 2.5-inch HDD)
All possible options described in relevant system configurator.
4 x 2.5-inch hot-plug SAS/SATA
6
8 x 2.5-inch hot-plug SAS/SATA
www.fujitsu.com/fts
Advertisement
