Broan EC62 SERIES Installation Instructions Manual
  1. Manuals
  2. Brands
  3. Broan Manuals
  4. Ventilation Hood
  5. EC62 SERIES
  6. Installation instructions manual

Broan EC62 SERIES Installation Instructions Manual

Elite ec62 series;
Hide thumbs Also See for EC62 SERIES:
Table of Contents

Advertisement

Quick Links

INSTALLATION INSTRUCTIONS
HB0091
EC62 SERIES
INTENDED FOR DOMESTIC COOKING ONLY
!
!
READ AND SAVE THESE INSTRUCTIONS
INSTALLER: LEAVE THIS MANUAL WITH HOMEOWNER.
HOMEOWNER: USE AND CARE INFORMATION ON PAGE 12.
Broan-NuTone Canada Inc.; Mississauga, Ontario www.broan.ca
877-896-1119
www.broan.ca
REGISTER YOUR PRODUCT ON LINE AT: www.broan.ca
SV08970 rev. 05

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EC62 SERIES and is the answer not in the manual?

Questions and answers

Related Manuals for Broan EC62 SERIES

Summary of Contents for Broan EC62 SERIES

  • Page 1 INTENDED FOR DOMESTIC COOKING ONLY READ AND SAVE THESE INSTRUCTIONS INSTALLER: LEAVE THIS MANUAL WITH HOMEOWNER. HOMEOWNER: USE AND CARE INFORMATION ON PAGE 12. Broan-NuTone Canada Inc.; Mississauga, Ontario www.broan.ca 877-896-1119 www.broan.ca REGISTER YOUR PRODUCT ON LINE AT: www.broan.ca SV08970 rev. 05...

  • Page 2: To Reduce The Risk Of Fire, Electric Shock Or Injury To Persons, Observe The Following

    To reduce the risk of fire and electrical shock, the ducts. Broan Elite EC62 Series models must be installed only with their own built-in blower(s). Other blowers Use proper pan size. Always use cookware appropriate cannot be substituted.
  • Page 3 - EC62 SERIES POWER PACK SYSTEM - TANDARD TANDARD ODEL ODEL 3¼” 10” R 3¼” 10” W 10” R APACITY OUND NOT INCLUDED NOT INCLUDED NOT INCLUDED NOT INCLUDED ODEL 10” R OUND DJUSTABLE LBOW NOT INCLUDED ODEL 10” R...

  • Page 4: Prepare The Installation

    1. PREPARE THE INSTALLATION WARNING When performing installation, servicing or cleaning the unit, it is recommended to wear safety glasses and gloves. NOTE: Before proceeding to the installation, check the contents of the box. If items are missing or damaged, contact the manufacturer.
  • Page 5 3. PREPARE CUSTOM HOOD WARNING When building a custom hood, always follow all applicable construction codes and standards. The custom hood must be positively secured to wall studs or other wooden framework behind the drywall. Make sure it is capable of supporting its own weight and the weight of the power pack. Failure to do so may cause personal injury or damage to countertop or cooktop.

  • Page 6: Remove Filter

    To view specific model information, including depths for each liner models, visit www.broan.ca or contact Technical Support (phone number listed on front cover).

  • Page 7: Install The Adapter/Damper

    8. REMOVE WIRING COVER AND FRONT PANEL Using a Robertson or a Phillips no. 2 screwdriver, remove both wiring cover retaining screws (A). Detach it from the power pack and set aside with its screws. Then, remove both sides screws (B) retaining the front panel to the power pack. Carefully detach the front panel from the power pack and set aside with its screws.
  • Page 8 12. INSTALL THE ADAPTER AND THE DAMPER (DUAL BLOWER MODEL ONLY) OUNTING CREW OCATION Using 2 no. 8 x 3/8’’ screws from parts bag, assemble the adapter on the top of the power pack. Seal all joints with metal foil duct tape to eliminate air leaks. HJ0035 AMPER HINGE Install 10”...
  • Page 9 14. INSTALL THE POWER PACK CAUTION Take care not to kink ducting or pinch electrical cable when installing the power pack. LASPING PRINGS Lift the power pack in custom hood until the bottom of the clasping springs (2 per side) rests on the top of the custom hood base (grey zone in illustration at right). HD0370 From inside the power pack, using provided no.

  • Page 10: Reinstall The Blower

    16. REINSTALL THE BLOWER (SINGLE BLOWER MODEL, HORIZONTAL DISCHARGE ONLY) The single blower power pack is factory shipped for a vertical discharge installation. For a horizontal discharge installation, the blower must be flipped. IGHT Using a 5/16” socket, or a Phillips no. 2 or a OUNTING CREW OUNTING...

  • Page 11: Light Bulbs

    18. CONNECT WIRING (ALL MODELS) (CONT’D) Connect cable using provided wire connectors. Connect wires as follow: BLACK to BLACK, WHITE to WHITE and GREEN or BARE wire under ground screw (A). DO NOT FORGET TO CONNECT THE GROUND. HE0059 19. REINSTALL FILTERS CAUTION Remove protective plastic film covering filters before installing them.

  • Page 12: Operation

    21. USE AND CARE Filters The filters should be cleaned frequently. Use a warm detergent solution. Wash more often if your cooking style generates more grease — like frying foods or wok cooking. Remove filters by pushing it towards the back of power pack and rotating filter downward. Filters are dishwasher safe. Allow filters to dry completely before reinstalling them in the power pack.

  • Page 13: Wiring Diagram

    EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. During this one-year period, Broan-NuTone will, at its option, repair or replace, without charge, any product or part which is found to be defective under normal use and service.

  • Page 14: Service Parts

    Any third party replacement part used may cause serious damage and drastically reduce the performance level of your unit, which will result in premature failing. Broan-NuTone recommends to contact a certified service depot for all replacement parts and repairs.

This manual is also suitable for:

Elite ec621306ssElite ec622301ss

Table of Contents