Quick Reference - Supermicro X7DWE User Manual

Jumper Description
JBT1 CMOS Clear
JI 2 C1/JI 2 C2 SMB to PCI Slots
2 2
JI C3/JI C4 SMB to PCI-Express Slots
JPG1 VGA Enable/Disable
JPL1/JPL2 LAN1/2 Enable/Disable
JWD Watch Dog
Connector
COM1/COM2
FAN 1-6
Floppy
F/P USB2/3, 4/5, 6
IDE
JD1
JF1
JL1
JLAN1/2
JOH1
JPW1
JPW2
JWOL1
JWOR
SATA0 ~ SATA5
SIMLP
SMB
PWR_SMB
T-SGPIO-1/T-SGPIO-2
USB0/1
VGA
LED Description
LE1 Onboard Standby PWR warning LED Indicator
LED5 CPU1 VRM Overheat LED Indicator
LED6 CPU2 VRM Overheat LED Indicator
X7DWE Quick Reference
Description
COM1/COM2 Serial Port/Header
Chassis/CPU Fan Headers
Floppy Disk Drive Connector
Front Panel Accessible USB Headers
IDE HDD Connector
Speaker Header
Front Panel Connector
Chassis Intrusion Header
Gigabit Ethernet (RJ45) Ports
Overheat LED Header
24-pin Main ATX Power Connector
+12V 8-pin Secondary Power Connector
Wake-On-LAN Header
Wake-On-Ring Header
SATA Ports
(Low Profi le) SIMLP IPMI 2.0 Socket
System Management Bus (I
Power Supply SMBus Connector (J17)
Serial General Purpose Input/Output Headers
(Back Panel) Universal Serial Bus (USB) Ports
VGA Connector
1-5
Chapter 1: Introduction
Default Setting
(See Section 5-10)
Open (Disabled)
Open (Disabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Reset)
2 C) Connector (J18)