Setting The Beep - HP PhotoSmart C500 User Manual

To turn Auto Shutoff on or off: To turn Auto Shutoff on or off: To turn Auto Shutoff on or off: To turn Auto Shutoff on or off:
1. Turn the camera on and turn the camera mode dial to Rec
2. Press the Menu Menu button.
Menu Menu
3. Use the 4-way arrow button to scroll to the Preferences
scroll down to General
4. Press the Edit Edit Edit button (left soft key). Edit
5. Scroll down to Auto Shutoff
6. Use the 4-way arrow button to turn Auto Shutoff on or off.
7. Press the Exit Exit button (right soft key) to save the settings and exit the menus. Exit Exit

Setting the Beep

The camera uses a beep to communicate that an event has taken place. For example, when you take a photo, the
camera beeps to let you know that it has finished capturing the image. Beep is on by default.
The camera beeps:
• Twice after a photo has been taken.
• Once at the beginning of a Burst series, and then twice at the end of the series.
• For 3 seconds when the batteries are low.
• When you turn the camera on, if the memory card is damaged or unformatted.
HP PhotoSmart C500 Digital Camera User's Guide
General.
General General
Auto Shutoff. Auto Shutoff Auto Shutoff
Rec. Rec Rec
Preferences menu, then Preferences Preferences
Adjusting the Camera Settings
65