HP PhotoSmart C5340-90001 Quick Reference

Reference
Camera
Installing Batteries
Use four AA alkaline or lithium batteries. Insert
them such that the +/- electrodes match the
indicators on the inside of the battery cover.
Copyright © 1996 Hewlett-Packard Co.
Quick
Digital
Part No. C5340-90001

Troubleshooting

If you're having problems taking a photo:
1. Make sure the batteries are fresh and properly
inserted.
2. Check the LCD to see if the memory card is full. If
it is, erase the last photo or use another card.
3. a) Remove and insert the memory card. b) Make
sure the card isn't write protected. c) Try another
memory card.
If there's an "X" on the film icon in the LCD, see step
3 above.

Error Codes

If an error code displays on the LCD:
1. Turn the camera off and on to clear the error.
2. Try again.
If it's an E200 series error and turning the camera
off and on doesn't solve the problem, install new
batteries and try again.
If the problem still persists, contact technical
support at: (208) 376-FOTO (3686)