Advertisement
• Loosen the upper pin
and remove the spacer.
• Remove the upper pin
and the upper door.
Ventilation requirements
The airflow behind the ap-
pliance must be sufficient.
Installing the appliance
Caution! Make sure that the mains cable can move
freely.
Do the following steps:
www.zanussi.com
• Loosen the middle
hinge.
5 cm
min. 200cm
2
min.
200cm
2
• Remove the lower door.
• Loosen the lower pin.
x
1
If necessary cut the
adhesive sealing strip and
then apply it to the appli-
ance as shown in figure.
On the opposite side:
• Install the lower pin.
• Install the lower door.
• Tighten the middle
hinge.
• Install the upper door.
• Tighten the spacer and
tighten the upper pin.
x
2
Install the appliance in
the niche.
Push the appliance in the
direction of the arrows (1)
until the upper gap cover
stops against the kitchen
furniture.
Push the appliance in the
direction of the arrows (2)
against the cupboard on
the opposite side of the
hinge.
2
1
11
Hide quick links:
Advertisement
