Main Menu
Table of Contents
Turning Off the Mileage Display
You can temporarily turn off the
Current Fuel Mileage display.
1.
Turn the ignition switch to ON (II)
and make sure the transmission is
in Neutral (manual) or Park
(automatic) and the parking brake
is set.
2.
Use the Select/Reset knob to
select the odometer display.
3.
Press and hold the Select/Reset
knob for about 10 to 15 seconds,
then release it. The Current Fuel
Mileage display will turn off.
The display will turn back on when
you repeat the same procedure in
step 3.
Fuel Gauge
This shows how much fuel you have.
It may show slightly more or less
than the actual amount.
Avoid driving with an extremely low
f uel level. Running out of f uel could
cause the engine to misf ire, damaging
the catalytic converter.
Gauges
61