Honda Civic Hybrid 2005 Owner's Manual page 182

Main Menu Table of Contents
Changing a Flat Tire
12. Put on the spare tire. Put the
wheel nuts back on finger-tight,
then tighten them in a crisscross
pattern with the wheel nut wrench
until the wheel is firmly against
the hub. Do not try to tighten
them fully.
Lower the vehicle to the ground
13.
and remove the jack.
180
14. Tighten the wheel nuts securely in
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
facility.
Tighten the wheel nuts to:
80 lbf·ft (108 N·m , 11 kgf·m)
Remove the center cap before
15.
storing the flat tire in the trunk
well.
WING BOLT
16. Place the flat tire face down in the
spare tire well.
17. Remove the spacer cone from the
wing bolt, turn it over, and put it
back on the bolt.
18. Secure the flat tire by screwing
the wing bolt back into its hole.
SPACER
CONE