Deck Removal - Cub Cadet Z-Force S Operator's Manual

Deck Removal

Remove the mower deck from the tractor as follows:
1. Move the tractor to a level surface, disengage the PTO, stop
the engine, and set the parking brake.
2. Place the deck lift pedal in the lowest mowing position and
replace the lock pin in front of pedal in the deck height
bracket and secure by locking the lock pin. See Fig. 7-3.
Lock Rod
Lowest
Mowing
Position
3. Using a 1⁄2" drive in the idler pulley bracket, turn the wrench
towards the back of the tractor and slide the belt off the
PTO pulley. See Fig. 7-4.
Z-Force S60 &
Z-Force S54
Idler
Assembly
26 S 7— S
ection ervice
Highest
Mowing
Position
Figure 7-3
Z-Force S48
Idler Pulley
Bracket
Figure 7-4
4. Pull the cotter pins out of the four deck lift adjustment
brackets. See Fig. 7-5.
Cotter
Pin
Figure 7-5
CAUTION:
The deck lift helper springs will cause
the deck lift pedal to slam to the highest position if
the click pin is not in front of the pedal.
5. Slide the links off the pins.
NOTE: It may be easier to place the deck lift pedal in
the transport position when sliding the deck out from
underneath the tractor.
6. Jack up the rear-end of the tractor using the rear bumper.
7. Slide the deck out from underneath the tractor to the right
side.